|
Stern view... Both
gunwales temporarily installed. The scuppers (block separating the
inner gunwale from the hull were cut with a forstner bit on the drill
press. The bottoms are already have an 1/8" roundover. The tops will
get the same. The screw holes will
have a 1" wide by 17
foot strip of walnut covering them, the the outer edge will get a 1/8"
roundover also.
|
|
|
The bow deck is set
in place and the gunwales temporarily mounted. The gunwales will be epoxy sealed before
permanently mounting them. There will be a verticle former placed from
the inside of the hull to the bottom of the deck. The stern will get
the same, but with a dry storage area with a 1/4 turn cap.
|
|
